Elba EC 530, Instruction Manual

Page: 26 / 36

26
Flame Flame Flame
faulty in correct with excess
primary air primary air
long, vellow clear short and sharp
and interior blue too blue interior
trembling cone cone tending to
detach
CAUSE
air regulating correct air regulating
tube, too distance of tube, too
closed the tube open
Fig. 11.6
M
J
A
3 - ADJUSTMENT OF PRIMARY AIR
OF TOP BURNERS
By operating on the screw “M”, reset the
air adjuster “A” according to the instruc-
tions indicated on the table for the choice
of the injectors, where the distance
between injector and air adjuster is rec-
ommended (in mm).
Before lowering the cooktop, set the
burners on their sites and light them in
order to check whether the flames are
correct, as per the specifications given in
the next page. In case of uncorrect
flame, lift or lower the air adjuster.
2 - INJECTORS REPLACEMENT OF
TOP BURNERS
To replace the injectors, raise the cook-
top in the following manner (fig. 11.5):
– Litf the cooking top (fig. 11.5)
– Fully raise the adjusting air tube A (fig.
14.4) in order to easily reach the injec-
tor.
– Loose the screw “M” of each injector
and fully raise the adjusting air tube
“A” (fig. 11.6).
– By a polygonal 7 spanner, remove the
injector “J” from their housing and
replace it by the proper one according
to the kind of gas (see injectors table).
Fig. 11.5