DIAMAG
Operating Manual
Page 17
life. Treatment with the DIAMAG device is needed to prevent further
degeneration of the cells and to stimulate their further functioning.
Treatment method
The emitters are placed on the patient's head with the
«N» (north)
side towards the head so that the No. 1 emitters of each line are over
the occipital region, the middle emitters pass over the auricles, and the
No. 6 emitters of both lines are over the frontal part. Treatment is car-
ried out by the method of Program 4. For the first 3 treatments, the ex-
posure time should be 7 minutes. Before and after the procedure, blood
pressure is to be monitored. The duration of the following procedures is
20 minutes once a day.
The course length is up to 20 days. The course length may be ex-
tended if found necessary by the physiotherapist or attending physi-
cian. Repeated treatment courses, if necessary, are carried out in 1.5 -
2 months.
Sleep disorders.
Treatment method
The emitters are placed on the patient's head with the
«N» (north)
side towards the head in such a way that the No. 1 emitters of each line
are over the occipital region, while the No. 6 ones are over the frontal
part. Treatment is performed just before bedtime as set out in Program
1. The duration of the first 3 treatments is 12 minutes, of the subse-
quent ones
– 20 minutes. The course length is 10-20 days. Procedures
are conducted once a day.
Osteochondrosis of the cervical spine with symptoms of
cephalgia, cranialgia.
Treatment method
The emitting lines are separated
and placed along both sides of the
cervical spine, the
«N» (north) side
turned towards the body. The No. 1
emitters are placed over the occipital
region so that the exposure is di-
rected to the first and second cervi-
cal vertebrae. Follow the method of
Program 2. After that, the emitting
lines are fastened together into a ring
and placed onto the head in such a
Fig. 12
