DIAMAG
Operating Manual
Page 10
Fig. 6
Fig. 5
The LED on the indicator starts flashing when placed against the
working surfaces of the emitting lines, confirming the magnetic field
presence.
In order to fix the emitter lines on the patient's head, use special
elastic bands. To do this, place the flexible emitting lines against one
another as shown in Figure 5. Pull one elastic band through the
«front» line buckles (Fig. 6), and the other elastic band in the same
way through the
«rear» buckles. Place the emitter on the patient’s
head as described below (see Fig. 7 for an example). For a tighter fit of
the emitters around the patient’s head, pull the loose ends of the elas-
tic bands.
Rear buckles
Front buckles
Elastic bands
