manualshive.com logo in svg

El.Mo VILLEGGIO, User Manual, Page: 18 / 56

Share
Download
El.Mo VILLEGGIO User Manual Download Page 18

18

VILLEGGIO   -   

USER MANUAL

   -   090060699

4.16.2 ATLANTE4PLUS

ATLANTE4PLUS device is a bidirectional control device; it is equipped with 6 backlit yellow keys plus a cen-

tral two-colour LED (green/red) for operating indications. Under the rubber keys, the yellow LEDs light on to
confirm the reception and execution of the commands. The central LED indicates with the green light the device
activation caused by the pressure of a key, with the red light the impossibility to perfom the command or the
missed confirm of the command reception.

Note: in case of impossibility to perfom the command or missed confirm of the command reception the LED

light will be red. In case of impossibility to perfom the command (ex. arming command with panel not ready to
be armed) the red LED lights on within few seconds; in case of missed confirm of the command reception, the
red LED lights on after 10 seconds.

Remote control device and proximity key cannot be used simultaneously, only alternatively. 

The remote control device cannot be used for partial/total arming in Max Security mode.

4.16.3 ATLANTE6 

Summary of Contents for VILLEGGIO

























































Reviews:

No comments