EKOM DK50 S, Installation, Operation & Maintenance Manual

Page: 20 / 96

DK50
NP-DK50_2 - 20 - 06/2008
3. CAUTIONS AND SYMBOLS
In installation, operation and maintenance manual, on packages and product, the following labels or
characters are used for extra important data:
Data or instructions and bans for the prevention of damage to health or material
damages.
Caution to dangerous electric voltage
Special data regarding correct usage of the appliance and the other warnings.
CE – marking
Caution! Hot surface.
Compressor is remote-controlled and may be started without warning
Connection of protective wire
Terminal for equipotential connections
Fuse
Alternate current
Handling mark on package – Fragile, handle with care
Handling mark on package – This way up (Vertical position of cargo)
Handling mark on package – Protect against moisture
Handling mark on package – temperature during storage and transport
Handling mark on package – Limited pilling up
Mark on package – Recyclable material
4. STORAGE AND TRANSPORT CONDITIONS
Compressor is sent from a plant in transport cardboard. Thus the appliance is secured against damage
during transport.
For transport use always original packaging of compressor, if possible.Transport
compressor in upright position, it must be always secured with transport fixing.
Protect compressor against humidity and extreme temperatures during transport and
storage.Compressors in original packaging can be stored in warm, dry and dust-free areas. Do
not store in places together with chemical substances.
Keep packaging material, if possible. If its keeping is not possible, dispose of the packaging
material in an environmentally friendly way. Transport cardboard can be added to paper for
recycling.
Compressor can be transported only without pressure. Prior transportation, necessarily
release air pressure from pressure tank and pressure hoses and release pertinent
condensate.