EKOM DK 50 4X2VT/M, User Manual

Page: 8 / 60

IMPORTANT INFORMATION
NP-DK50-Nx2VTM-ADM-EN-1_06-2022 8 06/2022
6. STORAGE AND TRANSPORT CINDITIONS
The compressor is shipped from the
manufacturer in transport packaging. This
protects the product from damage during
transport.
Potential for damage to
pneumatic components.
The compressor must be
transported only when all air
has
been vented. Before
moving or transporting the
compressor, release all the air
pressure from the tank and
pressure hoses, from dryer
chambers
and drain
condensate from the tank and
from the condensate separator
on the dryer.
Keep the original factory
packaging in case the device
needs to be returned Use the
original
factory packaging
during transport as it provides
optimum protection for the
product. . If it is necessary to
return the product during the
warranty
period, the
manufacturer is not liable for
damages caused by improper
packaging.
The compressor is shipped in a
vertical position and must be
secured using transport straps.
Protect the compressor from humid
and
dirty environments and
extreme temperatures during
transport and storage. Do not store
near
any volatile chemical
substances.
If not, please dispose of the original
packaging
material in an
environmentally-friendly way. The
packaging cardboard can be
recycled with old paper.
Storing or shipping the equipment
in any conditions other than those
specified below is prohibited.
6.1. Ambient conditions
Products may only be stored and transported in vehicles that are free of any traces of volatile
chemicals under the following climactic conditions:
Temperature
–25°C to +55°C, do 24h at up to +70°C
Relative humidity max. 90% (non-condensing)