OPERATION
06/2022
35
NP-DK50-Nx2VTM-ADM-EN-1_06-2022
The parameters of this unit do not require
configuration or set up under normal circumstances.
The LED indicator on the expansion module should
be green once the equipment is connected to its
power source and the display should show the
current operating hours.
The displayed hours are only
illustrative.
Proceed in accordance with Chapter 22 if the
indicator is not green.
If the operating hours are not shown, the
compressor may have been disconnected
from the power for an extended period of time
and it must be restarted.
The controller is unable to
archive time and data if it is
disconnected from the power
for more than 80 hours. This
data must be configured when
the equipment is first placed
into
service
or
after
an
extended period in which it has
been placed out of service.
The display shows the main menu.
press▲ or ▼ to move the “>” cursor
on the display to
Setup..
and press
OK
to confirm
A menu appears.
press▲ or ▼ to move the “>” cursor
on the display to
Clock..
and press
OK
to confirm
A menu appears.
press▲ or ▼ to move the “>” cursor
on the display to
Set Clock..
and
press
OK
to confirm
A menu appears.
press ▲ or ▼ to select the day of the
week
press ► or ◄ to move the cursor to
the next position
press ▲ or ▼ to set the desired value
repeat the previous two steps to set
the date and time
confirm by pressing
OK
Summary of Contents for DK 50 4X2VT/M
