EKOM DK 50 4X2VT/M, User Manual

Page: 7 / 60

IMPORTANT INFORMATION
06/2022 7 NP-DK50-Nx2VTM-ADM-EN-1_06-2022
version is to be used in the event of
any uncertainties.

This user manual is the original
instructions. Translation is performed
in accordance with the best available
knowledge.
5.2. General safety warnings
The manufacturer designed and
manufactured the product to minimise all risks
when used correctly for the intended use. The
manufacturer considers it its obligation to lay
down
the following general safety
precautions.

Use and operation of the product must
comply with all laws and local
regulations valid in the place of use.
The operator and user are responsible
for following all the appropriate
regulations
in the interests of
performing work safely.

Only the use of original parts
guarantees the safety of operating
personnel and the flawless operation
of the product itself. Only the
accessories and parts mentioned in
the
technical documentation or
expressly approved by the
manufacturer should be used.

The operator must ensure that the
device is functioning correctly and
safely before every use.

The user must be familiar with the
operation of the device.

Do not use the product in
environments with a risk of explosion.

The user must inform the supplier
immediately if any problem directly
related to the operation of the device
occurs.

Any serious incident that has occurred
in relation to the device should be
reported to the manufacturer and the
competent authority of the Member
State in which the user and / or patient
is established.
5.3. Safety warnings on protection
from electric current

The device must only be connected to
a properly installed, earthed socket.

Before the product is plugged in,
ensure that the mains voltage and
frequency stated on the product are in
compliance with the values of the
mains.

Prior to putting the device into
operation check for any damage to the
connected
pneumatic lines and
electrical wiring. Replace damaged
pneumatic lines and electrical wirings
immediately.

Immediately disconnect the product
from the mains (remove power cord
from the
socket) in hazardous
situations or in the case of a technical
malfunction.

During all repairs and maintenance,
ensure that:
- the mains plug is removed from the
power socket
- pressure is vented from the air tank
and pipes

The product shall only be installed by
a qualified technician.