EKOM DK 50 4X2VT/M, User Manual

Page: 41 / 60

AD DRYER
06/2022 41 NP-DK50-Nx2VTM-ADM-EN-1_06-2022
The drying mode is set based on the expected
pressure range in which the device will
operate and the version of the compressor
(with or without a cabinet).

compressor without a cabinet t
O
< 25 ̊C
- set to ECONOMY mode

compressor without a cabinet t
O
= 25 ̊C
- 30 ̊C - set to STANDARD mode

compressor without a cabinet t
O
> 30 ̊C
- set to ENHANCED mode

compressor in cabinet - set to
ENHANCED mode
t
O
- ambient temperature
20. MAIN SCREENS
The home screen opens once the user
interface language and drying mode are set.
There are 4 main screens accessed from the
home screen. The arrows at the bottom of the screen are
used to navigate between the individual
screens.
20.1. Home screen
(*this information is only shown if the compressor is equipped with a dew point sensor)
- Basic information and measured parameters are shown on the dryer
Adjustment of the dryer pressure
version
Adjustment of the dryer mode
Reset and adjustment of service
intervals, reviewing service and alarm
messages
Dryer operating
Current pressure in
Current dew point *
Time to next service
Toggle to display dryer
operation
Switch to language selection
Hour counter