EKOM ASPINA DO M, User Manual

Page: 17 / 196

INSTALLATION
12/2021 17 NP-DO M-39_12-2021
INSTALLATION
Risk of incorrect installation.
Only a qualified professional can install the equipment and place it into operation
for the first time. This professional is obliged to train operating staff as to the use
and maintenance of the device. Installation and training of all operators shall be
confirmed by the installer’s signature on the certificate of installation.
Risk of incorrect installation.
ANY MODIFICATION OF THIS EQUIPMENT IS FORBIDDEN!
Risk of damage to the device.
This equipment cannot be used nearby other instruments. If this equipment is
used nearby other instruments, the equipment must be observed in order to verify
normal operations in the configuration it will be used.
Instruments may be affected electro-magnetically!
You may notice a “new product” odour when you first place the product into
service (for a short period of time). This odour is temporary and does not impede
the normal use of the product. Ensure the space is properly ventilated after
installation
.
INSTALLATION CONDITIONS

The equipment may only be installed and operated in dry, well ventilated and dust-free rooms.

The mobile dental suction equipment should be installed with regard to an easy access for the
operation and maintenance and good accessible rating plate.

The equipment should stand on a plane, sufficiently stable base (be aware of the suction
equipment weight, see Technical data).

The equipment may not be operated outdoors or in wet or damp environments.
Risk of explosion.
Do not use the equipment in the presence of explosive gases, dust or
combustible liquids.

To guarantee a trouble-free operation of the suction equipment, the room temperature should
never drop under +5˚C and 40°C. The ideal ambient temperatures are b10°C
up to +25°C.

Most of the electric energy used by the suction pump (9) is converted to heat and given off to the
ambient. During a longer lasting work, above all with the desalivating mouthpiece, the box
temperature increases over 40°C causing an automatic actuation of the cooling fan. After the
room is cooled down under approximately 32°C, the fan turns off again.