EKKO ES100E, Operator'S And Service Manual

Page: 12 / 65

Work Area Safety
10
Do not use controller to release the platform
when the platform is stripped, stuck or
impeded its normal movement by nearby
objects. Everyone must leave away from the
platform before intending to release platform
by ground controller.
Use extreme care and slow speeds while
driving the machine in the stowed position
across uneven terrain, debris, unstable or
slippery surfaces and near holes and drop-offs
with the platform stated.
Do not use the machine as a crane.
Do not push the machine or other objects with
the platform.
Do not contact adjacent structures with the
platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform
perimeter.
Do not push off or pull toward any object
outside of the
platform.
Maximum allowable manual force
Model
Platform
retracted
Extension only
ES40E 400N Only indoor-2P
ES60E
400N
Indoor-2P
200N
Outdoor-2P
ES80E
400N
Indoor-2P
200N
Outdoor-2P
ES100E
400N
Indoor-2P
200N
Outdoor-1P
ES120E 400N
Indoor-2P
Do not alter or disable the limit switches.
Do not alter or disable machine components
that in any way affect safety and stability.
Do not replace items critical to machine
stability with items of different weight or
specification.
Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Install additional devices for
placing tools or other materials on to the
platform, skirting boards and rails, it will
increase the weight of platform and increase
loading of the platform surface.
Do not place or attach fixed or overhanging
loads to any part of this machine.
Do not place ladders or scaffolds in the
platform or against any part of this machine.
Do not transport tools and materials unless
they are evenly distributed and can be safely
handled by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition, castle
nuts are properly tightened and cotter pins are
properly installed.