EKKO ES100E, Operator'S And Service Manual

Page: 14 / 65

Work Area Safety
12
Be aware of crushing hazards when grasping
the platform guard rail.
Observe and use color-coded direction arrows
on the platform controls and the platform decal
plate for drive and steer functions.
Do not operate a machine in the path of any
crane or moving overhead machinery unless
the controls of the crane have been locked out
and/or precautions have been taken to
prevent any potential collision.
No stunt driving or horseplay while operating a
machine.
Do not lower the platform unless the area
below is clear of personnel and obstructions.
Limit travel speed according to the condition
of the ground surface, congestion, slope,
location of personnel, and any other factors
which may cause collision.
Component Damage
Hazards
Do not use any battery charger greater than
24V to charge the batteries.
Do not use the machine as a ground for
welding.
Explosion and Fire Hazards
Only in the open, ventilated and away from fire
place such as sparks, flame and burned
cigarettes, can charge for battery.
Do not operate the machine in hazardous
locations or locations where potentially
flammable or explosive gases or particles may
be present.
Damaged Machine Hazards
Do not use a damaged or malfunctioning
machine. Conduct a thorough pre-operation
inspection of the machine and test all
functions before each work shift. Immediately
tag and remove from service a damaged or
malfunctioning machine.
Be sure all maintenance has been performed
as specified in this manual and the
appropriate service manual.
Be sure all decals are in place and legible.
Be sure the operator's, safety and
responsibilities manuals are complete, legible
and in the storage container located on the
machine.
Bodily Injury Hazard
Do not operate the machine with a hydraulic
oil or air leak. An air leak or hydraulic leak can
penetrate and/or burn skin.
Improper contact with components under any
cover will cause serious injury. Only trained
maintenance
personnel should access
compartments. Access by the operator is only
advised when performing a pre-operation
inspection. All compartments must remain
closed and secured during operation.
Battery Safety
Burn Hazards
Batteries contain acid. Always wear protective
clothing and eye wear when working with
batteries.
Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda
and water.
Do not expose the batteries or the charger to
water or rain during charging.