EKKO ES100E, Operator'S And Service Manual

Page: 31 / 65

Operating Instructions
29
Operational indicator codes
If the platform controls LED
indicator code (such as
LL ) ,Push in and pull out the red
Emergency Stop button to reset
the system
.
ECU Fault Code
Code Condition
-- Normal Conditions
01 System Initialization Fault
02 System communication error
03 Invalid Option setting Fault
09 GPS Communication failure
12
Chassis Toggle Switch ON at
power-up Fault
18 Pothole Guard Fault
31 Pressure Sensor Fault
32 Angle Sensor Fault
42
Platform Left Turn Switch ON at
power-up Message
43
Platform Right Turn Switch ON at
power-up Message
46
Platform Joystick Enable Switch ON
at power-up Fault
47
Platform Joystick not in neutral at
power-up Message
52 Forward Coil Fault
53 Reverse Coil Fault
54 Lift Up Coil Fault
55 Lift Down Coil Fault
56 Right Turn Coil Fault
57 Left Turn Coil Fault
58 General Brake Coil Fault
68 Low Voltage Fault
80 Over 80% Load Warning
90 Over 90% Load Warning
99 Over 99% Load Warning
OL Overloaded Platform Fault
LL
Machine Tilted Beyond Safe Limits
Fault
If you need more details, please contact
service department.