EKF PC7-FESTIVAL, User Manual

Page: 63 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
Removing the Board
Warning: This procedure should be done only by qualified technical personnel.
Disconnect the system from its power source before doing the procedures described
here. Failure to disconnect power, or telecommunication links before you open the
system or perform any procedures can result in personal injury or equipment damage.
Typically you will perform the following steps:
C
Switch off the system, remove the AC power cord
C
Attach your antistatic wrist strap to a metallic part of the system
C
Identify the board, be sure to touch the board only at the front panel
C Unfasten both front panel screws (top/bottom), unlock the ejector lever
C
Remove any onboard cabling assembly
C
Activate the ejector lever
C Remove the card carefully (be sure not to damage components mounted on the bottom
side of the board by scratching neighboured front panels)
C
Store board in the original packaging, do not touch any components, hold the board at
the front panel only
Warning: Do not expose the card to fire. Battery cells and other components
could explode and cause personal injury.
© EKF - 63 - ekf.com