EKF PC7-FESTIVAL, User Manual

Page: 105 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
J2 A B C D E
22 GA4
2)
GA3
2)
GA2
2)
GA1
2)
GA0
2)
21 CLK6 GND
20 CLK5 GND 2_ETH_B- 1_ETH_D- 1_ETH_B-
19 GND GND
18
2_ETH_A- 1_ETH_C- 1_ETH_A-
17 2_ETH_D- 2_ETH_C- PRST# RST#
7)
REQ6#
1)
GNT6#
16 4_PE_CLK- 2 DEG#
1) 4)
GND reserved
2)
15 4 2_PE_CLK-
FAL#
1)
(PSON#)
6)
REQ5#
1)
GNT5#
14 3_PE_CLK- 1 4_PE_CLKE# PPS
5)
SATA_SCL
4)
reserved
2)
13 3 1_PE_CLK- 3_PE_CLKE# PPM
5)
SATA_SDO
4)
SATA_SL
4)
12 4_ 1_PE_CLKE# 2_PE_CLKE# SATA_SDI
4)
4_
11 4_PE_RX00- 4_ 4_ 4_SATA_RX-
10 3_ 4_PE_TX00- 4_USB2- 4_SATA_TX- 3_
9 3_PE_RX00- 3_ 3_ 3_SATA_RX-
8 2_ 3_PE_TX00- 3_USB2- 3_SATA_TX- 2_
7 2_PE_RX00- 2_ 2_ 2_SATA_RX-
6 1_ 2_PE_TX00- 2_USB2- 2_SATA_TX- 1_
5 1_PE_RX00- 1_ 1_ 1_SATA_RX-
4 V(I/O) 1_PE_TX00- 1_USB2- 1_SATA_TX- reserved
2)
3 CLK4 GND GNT3# REQ4#
1)
GNT4#
2 CLK2 CLK3 SYSEN#
3)
GNT2# REQ3#
1)
1 CLK1 GND REQ1#
1)
GNT1# REQ2#
1)
signals marked grey/italic are not connected
The PC7-FESTIVAL does not provide backplane Ethernet by on-board controllers. As an option , the
CPU card can be combined as an assembly with the P82-GBE low profile mezzanine module,
which is populated with two I226-IT Ethernet controllers for 2.5GbE (4-speed, 10/100/1G/2.5G).
By means of the mezzanine connector GBE these ports are wired from the P82 module to the
carrier board backplane connector J2. The 2.5GBASE-T mode is not specified by the CompactPCI®
PlusIO Specification. Where not applicable, the I226 controllers fall back to lower speeds by
autonegotiation.
© EKF - 105 - ekf.com