EKF PC7-FESTIVAL, User Manual

Page: 30 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
On-Board Connectors & Sockets
P-EXP Utility EXPansion Interface Connector (LPC, USB, HD Audio, SMBus), interface to optional side
board
P-HSE1 High Speed Expansion Connector 1 (4 x PCIe/SATA, 2 x USB), interface to optional low profile
mezzanine module or side board
P-HSE2 High Speed Expansion Connector 2 (4 x PCIe, DisplayPort), interface to optional low profile
mezzanine module or side board
J1 CompactPCI® Bus 32-bit (universal V(I/O)), 33/66MHz, supports up to 7 peripheral card slots
J2 CompactPCI® PlusIO for rear I/O usage or CompactPCI® Serial peripheral card slots, support for 4 x
PCI Express® Gen2, 4 x USB 2.0, 4 x SATA 3Gbps (option)
P-SODM 260-pin DDR4 ECC Memory Module (ECC SODIMM)
P-XDP CPU Debug Port
1)
1) Connector populated on customers request only
Pin Headers
P-FPH Pin header suitable for Front Panel Handle switch cable harness
P-ISP PLD glue logic device programming connector, not populated
Jumpers
J-GP Jumper to reset UEFI/BIOS Setup to EKF Factory Defaults, IEEE 1588 Pulse per Second Output
J-MFG Jumper to enter Manufacturing Mode, not populated
J-RTC Jumper to reset RTC circuitry (part of PCH), not populated
© EKF - 30 - ekf.com