EKF PC7-FESTIVAL, User Manual

Page: 9 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
Technical Features
Feature Summary
Feature Summary
General
<
CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
<
Form factor single size Eurocard (board dimensions 100 mm x 160 mm)
< Mounting height 3U
< Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
<
Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
<
Backplane communication via CompactPCI® J1 and J2 hard metric connectors
<
J1 Connector for PICMG® CompactPCI® Classic 32-Bit support
< J2 Connector (UHM high speed) for CompactPCI® PlusIO support (PCIe®, SATA, USB2) *
< J2 PlusIO configuration allows for either CompactPCI® Serial hybrid backplane usage or rear I/O module
attachment
<
J2 Connector option available for 64-bit system slot (legacy CompactPCI® 2.0 Classic)
< Side cards and low profile mass storage modules available as COTS and also as custom specific
* In case of obsolescence, the J2 UHM connector will be replaced by the CompactPCI® 2.0 classic J2 connector. This may reduce high
speed backplane transfer in particular applications (PCIe Gen1 2.5GT/s, SATA 1.5Gbps). This does not affect peripherals attached via
the P-HSE mezzanine connector.
Power Supply
<
+5V, +3.3V according to CompactPCI® 2.0 via J1 backplane connector
<
Total power consumption depends on processor type and mezzanine assembly
< +5V only board design for low cost system power supply with all 25W processors *
< SAC (Stand-Alone Computer) option w. two-pos. 5V/10A terminal block (J1/J2 removed)
<
+12V is required additionally for PC7-FESTIVAL mezzanine assemblies with e.g. S20, S40, SCL **
* option different SKUs available with 25W processors also for +5V/3.3V backplane supply - specify when ordering
on request: PC7-FE5V only can d3.3V to backplane for CompactPCI® peripheral boards
** not recommended
© EKF - 9 - ekf.com