_ Electric Ovens _ rev. 2 _______________________________________ KF 630 D UD – KF 733 D UD – KF 937 D UD
KF 966 D AL UD – KF 966 D UD _
________________________________________________________________________________________ page. 11 _
•
The time parameter (symbol
) can be set from 0 hours and 01 minutes to 9
hours and 59 minutes. If “INF” or “HLD” appear on the display, this means that the timer is
excluded. The oven operates continuously until manually turned off with the
button.
When “INF” appears on the display (only displayed for step 1), steps 2 - 3 - 4 are disabled (leds
off).
When “HLD” appears on the display (only displayed for step 4), this means that the cooking
cycle, after terminating the previous steps, continues without the timer and with the parameters
set for phase 4. (The cooking cycle is switched off by pressing the
button). This operation
lets the user keep food “warm” (at the end of the cooking cycle) for the desired amount of time.
The temperature parameter (symbol
) can be set from 50° C to 270° C.
The humidity parameter (symbol
) can be set from 0 to 100 (continuous humidity).
11. Cooking cycle ON/OFF
11. Cooking cycle ON/OFF
11. Cooking cycle ON/OFF
11. Cooking cycle ON/OFF
The cooking cycle starts and stops by pressing the
button. The resistance, motor and water
solenoid valve are switched off at the end of the cooking cycle. The buzzer sounds for 30
seconds and “0.00” blinks on the display. Temperature/humidity parameter settings for the last
cycle step remain set.
If an “extra-time” is set during the next 30 seconds, the oven automatically restarts and cooking
continues with the temperature and humidity parameters for the last step used. When “extra
time” has elapsed, the cooking cycle ends.
If the 30 seconds elapse or the cooking cycle is interrupted by pressing the
button, all set
parameters are reset and the oven readies for new cooking cycle settings.
1
1
1
12
2
2
2. Displaying / changing parameters with the cooking cycle ON
. Displaying / changing parameters with the cooking cycle ON
. Displaying / changing parameters with the cooking cycle ON
. Displaying / changing parameters with the cooking cycle ON
When the cooking cycle is on, parameters can be displayed by pressing the
button and
values can be changed (keys
) in each step (
button) in the cooking cycle.
Several seconds after the last change (for any of the four steps) operating step parameters are
displayed (led blinks on current step).
If the
“Time” parameter is selected
The value set for the selected step (led on symbol
) is displayed for 4 seconds alternated by
the remaining total (COUNT DOWN) for the rest of the other steps for 4 seconds (led blinks on
symbol
).
“Temperature” parameter
The value set for the selected step (led on symbol
) is displayed for 4 seconds alternated by
the value read in the cooking chamber for 4 seconds (led blinks on symbol
).
“Humidity” parameter
The set value is displayed for the selected step (fixed led on symbol
).
