_ TECNOEKA Srl __________________________________________________________ use and instruction manual _
_ page. 10 ________________________________________________________________________________________
7.
7.
7.
7. How to use the control panel
How to use the control panel
How to use the control panel
How to use the control panel
Control Panel symbol legend:
Control Panel symbol legend:
Control Panel symbol legend:
Control Panel symbol legend:
1)
1)
1)
1)
Parameter on signal LED
6)
6)
6)
6)
Parameter value decrease button
2)
2)
2)
2)
Cooking parameter selection button
7)
7)
7)
7)
Parameter value increase button
3)
3)
3)
3)
Step on signal LED
8)
8)
8)
8)
Cooking program select/save button
4)
4)
4)
4)
Cooking step selection button
9)
9)
9)
9)
Manual humidifying button
5)
5)
5)
5)
Parameter display
10)
10)
10)
10)
START/STOP button
8. Ignition
8. Ignition
8. Ignition
8. Ignition
The control panel (digital) automatically turns on as soon as the oven is electrically powered.
The lights in the cooking chamber turn on. “0.00” appears on the display to indicate time
(expressed in hours and minutes) and the time led turns on in the parameter field (symbol
).
The phase 1 led turns on in the “phase” field (set to receive cooking parameters).
9. Switch
9. Switch
9. Switch
9. Switch----off
off
off
off
The control panel automatically turns off10 minutes after the cooking cycle ends (in “manual"
mode or in “automatic” mode whether switched-off automatically or by pressing the
button) without any button being pressed.
The lights in the cooking chamber turn off, the display and operating function leds turn off.
Only the
button led remains on.
To restart the control panel, simply press the
button.
10. Operation mode
10. Operation mode
10. Operation mode
10. Operation mode
The cooking cycle can be run in “manual” or “programmed” mode which can be divided in 4
steps. TIME/TEMPERATURE/HUMIDITY cooking parameters can be set for each step.
MANUAL MODE
To select cooking parameters (TIME/TEMPERATURE/HUMIDITY), press the button
the led
for the selected parameter turns on each time the button is pressed. At least cooking time and
temperature parameters must be set for the cooking cycle to start.
•
To select cooking cycle steps (1 – 2 – 3 – 4), press the button
the led relevant
to the selected step turns on each time the button is pressed. The led relevant to the current
step blinks during the cooking cycle.
•
To set or change the selected parameter, press buttons
.
Press button
to increase the parameter. - Press button
to decrease the parameter.
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6 7777
8
8
8
8
9
9
9
9
1
1
1
10
0
0
0
