5
PRECAUTIONS
WARNING
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to polarities and voltages
other than those specified on the monitor or in this User’s Manual may cause fire, electric
shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
Only supply power after completing all power connections.
Making connections with power supplied may result in electric shock.
If using the DC power terminal block, do not touch the terminal block while it is
electrified.
Touching the terminal block in this state may result in electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
To remove the DC power terminal block, grasp the terminal block firmly and pull.
Tugging on the wiring may damage it and may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or
electric shock.
Handle the fuses with care.
• When replacing a fuse, be sure to unplug the plug from the power outlet in advance.Otherwise,
an electrical shock may result.
• Never use a fuse outside the rating. Doing so may result in a fire or malfunction.
Handle the batteries for the stylus (touch pen) with care.
Not doing so may result in battery explosion, liquid leakage, or burns.
• Do not disassemble, heat, short-circuit, or immerse the provided batteries in water.
• Install/change batteries in a correct way.
• When replacing batteries, use ones of the same type and model.
• Insert batteries with correct direction of the plus (+) and minus (-) sides.
• Do not use the battery with coating damaged.
• Dispose of your battery in a designated disposal area.
English
