42
Appendix
The DuraVision FDS1782T
is intended for use in an electromagnetic environment in which radiated RF disturbances are con-
trolled. For other portable and mobile RF communication equipments (transmitters), minimum distances between portable and
mobile RF communications equipment (transmitters) and the
DuraVision FDS1782T
are as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
(W)
Separation distance according to frequency of transmitter
(m)
150 kHz to 80 MHz
d = 1.2√P
80 MHz to 800 MHz
d = 1.2√P
800 MHz to 2.7 GHz
d = 2.3√P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance "d" in meters (m)
can be estimated using the equation applicable to the frequency of the transmitter. Where "P" is the maximum output power rat-
ing of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1
At 80 MHz and 800 MHz, the separation distance for a higher frequency range must be applied.
Note 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Cable
Length
Signal cable:
PP200
2 m
Signal cable:
FD-C39
2 m
Signal cable:
MD-C87
1.8 m
USB cable:
MD-C93
1.8 m
Audio cable:
Shield
2.1 m
Headphone cable:
Shield
3 m
Power cable (with grounding wire)
2 m