Cleaning, Maintenance and Care
46
Eisfink Max Maier GmbH & Co. KG
8.10.3 Insert the parts again
The parts are inserted in the reverse order to that described for removal.
# Feed in filter mat
The visible side is blue.
Feed the filter mat
through the rear wire.
Push it back as far as it
will go.
Make a loop and push
the mat forward through
the front wire as far as it
will go.
Make sure that the filter
mat is positioned
smoothly.
# Install grease drip trays
Grasp the grease drip
tray at the handle edge
and push it down
vertically as far as it will
go.
Then push it back as far
as it will go.
Insert the other grease
drip tray at the front.