Cleaning, Maintenance and Care
Eisfink Max Maier GmbH & Co. KG
37
8.6
Clean casters
ATTENTION
Cleaning the casters incorrectly can damage them.
►
Never clean the casters with a steam-jet blower, as this may cause lubricating grease
to escape from the wheel bearings.
►
Clean the casters with
mild washing up detergent diluted in hot water
. After
cleaning, rub surfaces dry with a
soft cloth
.
8.7
Clean and service plastic parts
Clean the plastic parts with
mild washing up detergent diluted in hot water
. After cleaning, rub
the surfaces dry with a
soft cloth
.
# Clean technical compartment seal
The seal can be removed for cleaning if necessary.
Clean the dirty seals with
mild washing up detergent
diluted in hot water
. Then rub dry with a
soft cloth
.
Reinsert removed seals correctly in the cover of the technical compartment.
# Clean cutting board
Example
‘
ec
’
Remove, rinse with lukewarm water, and rub dry.
If necessary, clean the cutting board in the dishwasher.
User tip
If the cutting board is not in place unpleasant odours can develop, as the extraction is
interrupted.
►
Ensure that the cutting board is in position. Briefly removing the cutting board for
cleaning will not interrupt the extraction.