background image

EN

- 10 -

or Rechargeable (Nickel Cadmium, Nickel 

Metal Hydride, or Lithium-Ion) batteries.

6.   Do not dispose of batteries in 

fi

 re. 

7.   Batteries should be recycled or disposed of 

as per state, provincial and local guidelines.

When shipping or disposing of batteries and 

cordless tools, always ensure that they are 

packed individually in plastic bags to prevent 

short circuits and 

fi

 res. 

Safety information for the in

fl

 ator/de

fl

 ator 

Danger! The following basic safety actions 

must be taken when using this in

fl

 ator/

de

fl

 ator in order to protect the user from 

electric shocks and the risk of injury and 

fi

 re. 

Read and follow these instructions before 

using the equipment.

• 

 Check the ambient conditions

Do not expose the inflator/deflator to rain. 

Never use the inflator/deflator in damp or wet 

locations. There is a risk of electric shock! 

Provide good lighting. Do not use the inflator/

deflator near flammable liquids or gases. 

There is a risk of explosion!

• 

 Protect yourself against electric shocks

Avoid bodily contact with earthed parts, e.g. 

pipes, radiators, cookers and refrigerators.

• 

 Keep children away

Do not allow other persons to touch the 

inflator/deflator or cable, keep them away 

from your work area.

• 

 

Do not use the cable for purposes other 

than that for which it is designed

Do not carry the inflator/deflator by its cable 

and do not use the cable to pull the plug out 

of the socket. Protect the cable from heat, 

oil and sharp edges. The cable/plug could 

become damaged.

• 

 

Take care of your inflator/deflator

Keep your inflator/deflator clean in order to 

work well and safely. Follow the maintenance 

instructions. Check the power plug and cable 

on a regular basis and have them replaced by 

an authorized specialist if they are damaged. 

Check the extension cable regularly and 

replace it if damaged.

• 

 Avoid unintentional starting

Make sure that the switch is turned off when 

connecting to the power supply.

• 

 Check your inflator/deflator for damage

Before using the inflator/deflator again, 

carefully check the safety devices and any 

slightly damaged parts to ensure that they 

are in good working order. Check that the 

moving parts are working correctly, that they 

do not jam, and that no parts are damaged. 

Make sure that all parts are fitted correctly to 

ensure that the equipment remains safe to 

use. Unless otherwise stated in the operating 

instructions, damaged guards and parts have 

to be repaired or replaced by a customer 

service workshop. Damaged switches have to 

be replaced by a customer service workshop. 

Never use an electric power tool with a switch 

that cannot be turned on and off.

• 

 Leave all repairs to a qualified electrician

Repairs must be left strictly to qualified 

electricians or the user might suffer an 

accident.

• 

 

Noise

Wear ear muffs when you use the inflator/

deflator.

• 

 

Replacing the power cable

To prevent hazards, leave the replacement 

of damaged power cables strictly to the 

manufacturer or a qualified electrician. There 

is a risk of electric shock!

• 

 Inflating tires

Directly after inflating tires, check the 

pressure with a suitable pressure gauge, for 

example at your filling station.

• 

 

Place of installation

Set up the inflator/deflator on an even 

surface.

• 

WARNING! Risk of injury - Do not direct air 

stream at body.

Safety instructions for working with 

compressed air and blow-out pistols

• 

 The air which is sucked in by the deflator 

must be kept free of impurities that could 

cause fires or explosions in the deflator pump.

• 

 Wear safety goggles. Foreign bodies or blown 

off parts can easily cause injuries.

• 

 Do not blow at people and do not clean 

clothes while being worn. Risk of injury!

Safety information for paint spraying

• 

Do not process any paints or solvents with a 

flash point below 131°F (55°C). There is a risk 

of explosion!

• 

Do not heat up paints or solvents. There is a 

risk of explosion!

• 

If hazardous liquids are processed, wear 

protective filter units (face guards). Also, 

adhere to the safety information provided by 

the manufacturers of such liquids.

• 

The details and designations of the 

Ordinance on Hazardous Substances, which 

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   10

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   10

21.04.2022   12:54:40

21.04.2022   12:54:40

Summary of Contents for 4020455















































Reviews: