background image

EN

- 11 -

are displayed on the outer packaging of 

the processed material, must be observed. 

Additional protective measures are to be 

undertaken if necessary, particularly the 

wearing of suitable clothing and masks.

• 

Do not smoke during the spraying process 

and/or in the work area. There is a risk 

of explosion! Paint vapors are easily 

combustible.

• 

Never set up or operate the equipment in the 

vicinity of a fire place, open lights or sparking 

machines.

• 

Do not store or eat food and drink in the work 

area. Paint vapors are harmful to your health.

• 

The work area must exceed 1060 cu ft 

(30 m

3

) and sufficient ventilation must be 

ensured during spraying and drying. Do not 

spray against the wind. Always adhere to the 

regulations of the local police authority when 

spraying combustible or hazardous materials.

• 

Do not process media such as white spirit, 

butyl alcohol and methylene chloride with the 

PVC pressure hose. These media will destroy 

the pressure hose.

Operating pressure vessels

• 

You must keep your pressure vessel in good 

working order, operate the vessel correctly, 

monitor the vessel, carry out necessary 

maintenance and repair work immediately 

and meet the relevant safety precautions.

• 

The supervisory authority may enforce 

essential control measures in individual 

cases.

• 

A pressure vessel is not allowed to be used if 

it has faults or deficiencies that can endanger 

workers or third parties.

• 

Check the pressure vessel for signs of rust 

and damage each time before using. Do not 

use the compressor with a damaged or rusty 

pressure vessel. If you discover any damage, 

then please contact the customer service 

workshop.

SAVE THESE INSTRUCTIONS

2. Layout and items supplied

2.1 Layout

1. Housing 

cover

2.   Pressure tank

3.   Intake air 

fi

 lter

4.   Foot

5.   Quick-lock coupling (regulated compressed  

air)

6.   Pressure gauge (for reading the set pressure)

7.   Pressure regulator

8.   ON/OFF switch

9.   Transport handle

10.  Safety valve

11.  Drainage cock for condensation water

12.  Lithium-Ion battery pack (not supplied)

13.  Storage compartment for 8-piece adapter set

14.  8-piece adapter set

15.  Air Blow gun with Pressure gauge

16.  Blow-out adapter

17.  Air hose

18.  Battery cover

19.  Switch for battery charge level indicator

20.  Battery charge level indicator

21.  Adapter I

22.  Adapter II

23.  Vent adapter

24.  Relief valve

25.  In

fl

 ating needle

26.  Schrader to Presta adapter for bicycle tires 

27.  Plastic nozzle adapter 

28.  Tapered Metal nozzle

29.   Tapered Rubber nozzle 

30.  Air Chuck hose 

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

store where you made your purchase at the latest 

within 5 work days after purchasing the article and 

upon presentation of a valid bill of purchase. 

• 

Open the packaging and take out the 

equipment with care.

• 

Remove the packaging material and any 

packaging and/or transportation braces (if 

present).

• 

Check to see if all the items are supplied.

• 

Inspect the equipment and accessories for 

transport damage.

• 

If possible, keep the packaging until the end 

of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, plastic sheets and small parts. There is 

a risk of choking and su

 ocating!

• 

Air blow gun with pressure gauge 

• 

Blow-out adapter

• 

8-piece adapter set

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   11

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   11

21.04.2022   12:54:40

21.04.2022   12:54:40

Summary of Contents for 4020455















































Reviews: