User Manual of Network Video Recorder
31
Figure 2. 14
Selecting Multiple Channels
2.3.2
Editing the Connected IP Cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1.
Click the
icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 2. 15
Edit the Parameters
Channel Port:
If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
Transfer Protocol:
Auto, TCP and UDP are selectable; you can select the transfer protocol according to the
network condition.
2.
Click
OK
to save the settings and exit the editing interface.
To edit advanced parameters:
Steps:
1.
Drag the horizontal scroll bar to the right side and click the
icon.
Summary of Contents for EI-6120 NIP-16
