User Manual of Network Video Recorder
165
10.9
Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is
Uninitialized
or
Abnormal
.
Steps:
1.
Enter the Exception interface.
Menu > Configuration > Exceptions
2.
Select the Exception Type to
HDD Error
from the dropdown list.
3.
Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10. 26.
The alarm type can be selected to: Audible Warning, Notify Surveillance Center, Send Email and
Trigger Alarm Output. Please refer to
Chapter Setting Alarm Response Actions
.
Figure 10. 26
Configure HDD Error Alarm
4.
When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the list
below.
5.
Click the
Apply
button to save the settings
Summary of Contents for EI-6120 NIP-16
