User Manual of Network Video Recorder
135
Figure 9. 14
SNMP Settings Interface
3.
Check the
SNMP
checkbox to enable this feature.
4.
Configure the following SNMP settings:
•
Trap Address:
IP Address of SNMP host.
•
Trap Port:
Port of SNMP host.
5.
Click the
Apply
button to save and exit the interface.
Before setting the SNMP, please download the SNMP software and manage to receive the device
information via SNMP port. By setting the Trap Address, the NVR is allowed to send the alarm event and
exception message to the surveillance center.
9.2.5
Configuring Remote Alarm Host
Purpose:
With a remote alarm host configured, the NVR will send the alarm event or exception message to the host when an
alarm is triggered. The remote alarm host must have the Network Video Surveillance software installed.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the
More Settings
tab to enter the More Settings interface, as shown in Figure 9. 15.
Figure 9. 15
More Settings Interface
3.
Enter
Alarm Host IP
and
Alarm Host Port
in the text fields.
The
Alarm Host IP
refers to the IP address of the remote PC on which the Network Video Surveillance
Software (e.g., E1200 PC) is installed, and the
Alarm Host Port
must be the same as the alarm monitoring
port configured in the software.
4.
Click the
Apply
button to save and exit the interface.
Summary of Contents for EI-6120 NIP-16
