18
www.ehs-heating.com
7.6.
Powering On the Boiler and setting the Parameters
7.6.1.
Power On
Before any power is turned on to the boiler it is important that it is checked for any loose connections. Check all
connections including the factory-made ones as these can come loose in transit.
Prior to turning the boiler on for the first time, please make sure you have completed the following:
7.6.1.1.
All STEPS in the manual so far, have been completed as instructed
.
The boiler must have
been filled with water and isolating valves must be in the open position.
7.6.1.2.
The boiler casing is closed and secured.
7.6.1.3.
Set the thermostat to the off position or lowest possible temperature.
7.6.1.4.
By activating the appropriate RCD breaker in the consumer unit (or preferably next to the
boiler) external to the boiler, this will put the Boiler into standby mode. Don’t press the
power on button yet but leave it in standby mode until the system parameters can be
configured.
