WI-FI MODULE
95
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
When forwarding ports, enter the IP address that will be assigned to the CPU in the 'Local IP' field. For the ssh port, it is
safer to open an alternative port (e.g., 222) and forward to port 22.
After all the configurations are set, press 'Save & Apply' so that they become effective.
There are 3 LEDs in the router that indicate the status of the system:
LED
Status
Description
RUN
On, quick flashing
(250 ms)
Router is on (system initialization)
On, normal flashing
(500 ms)
Router is starting the operations
Off
Router is off
USR-NET
On, steady
Connected to the network and good signal
On, flashing
Connected to the network but the connection is slow
Off
Not connected to the network
PPP
On, steady
Link connected
Off
Link not connected
3 LEDs On
High signal available
2 LEDs On
Medium signal available
1 LEDs On
Low signal available
Off
No signal