TURNING-ON AND CONFIGURATION
34
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
9.2
CONFIGURATION
In order for sensors to be recognised by the system, they must be configured from the configuration menu via the
touchscreen.
The following procedure describes the steps to be followed in order to configure the system and make sure that the
peripheral devices are correctly connected.
9.2.1
STEP 1 | CONFIGURATION MENU
Press the CONFIGURATION icon to access the menu
9.2.2
STEP 2 | ENTERING THE PASSWORD
To access the system configuration section, a password must be entered so that only the enabled user can view this screen.
The default access password is
1234
. Enter the sequence and press OK.
STEP 1
•Open the configuration menu
STEP 2
•Enter password
STEP 3
•Open the Sensors Configuration menu
STEP 4
•Open the Sensors Search menu
STEP 5
•Search sensors by ID
STEP 6
•Search sensor by position and save them to the system
