FILTER MODULE
74
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
14.4
CONFIGURATION
To modify the range the module covers of the module, access the configuration menu 'SENSORS
TAG SETTINGS' (see
section 11.6).
To configure the Filters Sens module, do as follows:
Press the
'Filter Sensor Search'
key to associate the sensor to the System. If the module is correctly recognised,
the icon will become yellow. Then press 'Save Settings' and the icon will become green.
Use the
and
keys in the menu to increase or decrease the activation range of the device.
If a TAG is detected, and therefore temporarily disabled, the code associated is displayed at intervals of about 2
seconds under the legend 'FILTER SENSOR POWER'.