TURNING-ON AND CONFIGURATION
37
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
9.2.5
STEP 5 | SEARCHING SENSORS BY ID
The search sensors by ID function is used to associate each sensor ID (Factory Code uniquely assigned by the manufacturer)
with a number from 1 to 8 that identifies its position compared to the vehicle, in order to facilitate the subsequent system
calibration operations.
Press the SEARCH STARTING key to display all the sensors connected to the system.
This operation may take several seconds.
Once the Search Sensors by ID stage is completed, the sensors that have been identified are displayed.