Operation of EFAS – Controlling Bodies
62
EFAS
7. Press
to display the next line or
to display the
previous line. Press
to close the print preview. The
display shows
Start printout?
.
8. Acknowledge the displayed answer with
OK
if you
want to print the displayed data.
or
Select
NO
and press
OK
if you want to return to the
menu without printing the data.
or
Press
once again if you want to return to the print
preview.
6.3
Printing of Data
This section describes how to print out the data that is
stored in the digital tachograph or on the tachograph cards.
You may print the following data:
• Daily reports from driver card
• Daily reports from the digital tachograph
• Events and failures stored on the driver card
• Events and failures stored in the digital tachograph
• Speeding
• Technical data
• Speed profile (device option)
• Engine speed profile (device option)
• Status changes (device option)
Use the key to cancel printing at any time.
For examples and explanations, see the sections "Printout
Examples" on page 84 or "Messages" on page 77.
Note
Data cannot be printed when driving. Any printout is cancelled
when the vehicle starts moving.
Note
Leave the ignition on when printing. The printout is halted when
the ignition is turned off and cancelled after 30 seconds if igni-
tion is not switched on again.
Printing Stored Data
1. Make sure your control card is inserted in one of the
card slots.
2. Press
OK
.
The main menu is displayed.
3. Select
Printout
and Press
OK
.
