Operation of EFAS – Driver and Co-Driver
39
EFAS
4. Press
OK
.
5. Select
Begin
.
6. Press
OK
.
The condition “Ferry/Train Crossing” is enabled.
This condition is deactivated automatically when your
vehicle starts moving again or when the condition
“Out of scope“ (digital tachograph not required (OUT))
is enabled.
Display Time for Ferry/Train
1. Press key
when the condition “Ferry/Train” is
active.
The time (UTC) when the condition “Ferry/Train” was
activated is displayed for approx. 3 seconds.
3.10
Digital Tachograph not Required
When you leave an area where logging of your driver
activities by means of a digital tachograph is mandatory,
you may activate the condition “Out of scope“ (digital tach-
ograph not required).
Note
For more information on using menus, see the section "General
Settings" on page 64.
Activate “Digital Tachograph not Required” (OUT)
1. Press
OK
.
The main menu is displayed.
2. Select
Inputs
3. Press
OK
.
4. Select
OUT
Begin
.
