Operation of EFAS – Driver and Co-Driver
29
EFAS
Stopping the Journey
1. Park your vehicle. Leave the ignition on.
2. Withdraw the driver card. Press key
1
for longer than
1.5 seconds to withdraw the card.
The display asks for the country where your journey
ends.
3. Use the cursor keys
and
to select the country
where your journey ends. Press
OK
. The list of
country codes is shown in the section "Nation &
Region Codes, Time zones" on page 120. When
selecting Spain, the region must also be selected.
or
Ignore this input by pressing the key
.
4. The display offers the
Daily report print-
out?
.
5. If you require a daily report printout, use the cursor
keys
to select
YES
and press
OK
.
The list of driver activities will then
be printed. If your
shift had started the day before, the respective activi-
ties are also printed. Your driver card will be ejected
subsequently
.
or
If you don't require a printout, ignore the input by
pressing the key
. Your driver card will be ejected.
6. Withdraw the driver card of the co-driver, if necessary.
Press key
2
for longer than 1.5 seconds to withdraw
the card.
The driver card of the co-driver is ejected.
Note
If you did not end your shift, you will have to complete your
activities up to the end of this shift when inserting your driver
card next time.
