EFKA Variocontrol V810/V820
9
8 Operating Elements of Control Panel V820
Use insertable strip whose symbols correspond to the type of control. Pull out the standard insertable
strip by using a tool (e.g. tweezers), if necessary, and insert the appropriate strip.
See annex A.
Functional Setting of the Pushbuttons
Pushbutton P
Recall or exit of programming mode
Pushbutton E
Enter button for modifications in the programming mode
Push
Increase of the value indicated in the programming mode
Pushbutton -
Decrease of the value indicated in the programming mode
Pushbutton 1
Start backtack SINGLE / DOUBLE / OFF or start stitch condensing
Pushbutton 2
Stitch counting seam FORWARD / BACKWARD / OFF
Pushbutton 3
Light barrier function UNCOVERED-COVERED / COVERED-UNCOVERED /
OFF
Pushbutton 4
End backtack SINGLE / DOUBLE / OFF or end stitch condensing
Pushbutton 5
THREAD TRIMMER / THREAD T THREAD WIPER / OFF
Pushbutton 6
Automatic foot lifting at stop in the seam ON / OFF
Automatic foot lifting after thread trimming ON / OFF
Pushbutton 7
Basic position of the needle (bottom/upper dead center)
POSITION 1 / POSITION 2
Pushbutton 8
Bobbin thread monitor ON / OFF
Pushbutton 9
Function key - can be programmed
Pushbutton 0
Teach-in / execution of 40 possible seam sections
Pushbutton A
Pushbutton for backtack suppression/recall
Pushbutton B
Pushbutton for needle up/down
Symbol C
Letter symbol C for code number
Symbol D
Letter symbol F for parameter number
Symbol E
Pattern number in the teach-in mode
Symbol F
Seam number in the teach-in mode
Symbol G
Blocking of machine run activated
Symbol H
Input by pushbuttons blocked
Symbol I
Error message
Symbol J
Number of stitches in the teach-in mode
Symbol K
Bobbin thread monitor on. Symbol blinks when bobbin is empty.
Symbol L
Limited speed is effective
Symbol M
Right needle disengaged
Symbol N
Light barrier compensating stitches in the teach-in mode
Symbol O
Machine running
Symbol P
Automatic speed is effective
Symbol Q
Left needle disengaged
