EFKA Variocontrol V810/V820
6
7 Operation of Control Panel V810
7.1 Programming the Code Number
Code number technician level => 1907 and/or supplier level => 3112
Press pushbutton P and turn
power on. First digit blinks
Press push and/or - to
select the first digit
Press pushbutton >>.
Second digit blinks
Press push and/or - to
select the second digit
Press pushbutton >> twice.
Fourth digit blinks
Press push and/or - to
select the fourth digit
Press pushbutton E. The first
parameter on the technician
level is displayed
7.2 Selection of the Parameters
Note
The parameter numbers in the illustrations below serve as examples and may not be available in all program versions.
In this case, the display shows the next possible parameter number. (See Parameter List of the respective control).
