EFKA Variocontrol V810/V820
7
7.2.1 Direct Selection of the Parameters and Changing Parameter Values
After inputting the code number on
the programming level
Press pushbutton >> twice.
Second digit blinks
Press push and/or - to
select the second digit
Press pushbutton >>.
Third digit blinks
Press push and/or - to
select the third digit
Press pushbutton E. Parameter
value is displayed
Press push and/or - to
select the parameter value
After inputting and/or changing the parameter value, continue as shown in the following example
(possibilities
A
and
B
):
Press pushbutton E. The next
parameter number is displayed.
Press pushbutton P. Exit
programming.
Press pushbutton P. The same
parameter number is displayed.
Press pushbutton P. Exit
programming.
The display varies according to the type of control.
