EFKA Variocontrol V810/V820
4
2 Use of the Control Panels
The control panels V810/V820 are suitable for the connection to controls type AB62CV, AB200V, AB220A and DA220C,
as well as for FKV 82 and DC82 controls with the corresponding program and 9-pole/25-pole adapter (supplied with the
unit). See instruction manual of the respective control.
When using these control panels, digital input of all parameters (times, speeds, number of stitches, functions) is possible.
Easy selection of recurring functions by pushbuttons.
3 Unit Consisting of
■
Control panel Variocontrol
V810
- part no. 5970153
■
or
V820
- part no. 5970154
■
Support for control panel
- part no. 1112828
■
Velcro strips for fastening
- part no. 0206909
■
Insertable strip
V810
- part no. 0206898
■
or
V820
- part no. 0206899
■
Adaptor 9/25pol.
- part no. 0504539
4 Mounting of the Control Panel on the Machine
Mount the control panel
Variocontrol V810
and/or
V820
according to the instructions of the sewing machine
manufacturer, before putting the control into service.
For mounting devices see annex B.
Attention!
When choosing the mounting place and when wiring the connection cable, follow the safety instructions in
chapter 1.
It is especially important to keep a distance from moving parts..
5 Connection of the Control Panel to the Control
Attention!
Before plugging or unplugging the Variocontrol connecting plug, the drive must be disconnected by using
the mains switch or by pulling off the mains plug.
In order to set up the electric connection, the plug of the control panel must be inserted into socket B776 of the control box
and the union joint must be tightened.
The position of the socket is indicated in the instruction manual of the corresponding control box.
Attention!
Use the standard insertable strip above the pushbuttons of the control panel only for controls whose
functions correspond to the symbols. Replace the insertable strip for controls with different functions and
read the corresponding instruction manual!
