EFI Kyocera 17, Configuration And Setup

Page: 8 / 65

The following documentation resources are available for the Kyocera® Printing System 17 Powered by Fiery®.
Resource Description
User documentation Documents in this set: Color Printing , Configuration and Setup , Fiery Automation Package , Fiery
ColorRight Package , Printing , Utilities
Online help
•
Help can be accessed directly from each Fiery application or by going to help.efi.com .
•
Each help system is available as a printable PDF, accessed from the PDF icon in the upper right
corner of the Help window.
Additional reference
material
•
Fiery Color Reference - help.efi.com/ref/colorref/en-us/
•
Variable Data Printing - help.efi.com/ref/vdp/en-us/
•
Workflow Examples - help.efi.com/ref/workflows/en-us/
•
Configure Help - help.efi.com/configure/3.2.85/en-us/
General precautions for working with the PS-17
PS-17 hardware
Always observe the following precautions to assist with personnel safety and prevent data loss or equipment damage.
DANGER
Do not store or use flammable sprays or solvents near the PS-17 or the printer. Components within
these machines can operate at a high enough temperature to provide an ignition source. Storing or
using flammable items near these machines could cause the items to catch fire or explode.
DANGER
Never set any liquid on or near the PS-17 or the printer. Spilling liquids into either machine could result
in electric shock and damage the machine. If liquid is spilled on or underneath either machine, or any
object falls into either machine, disconnect the corresponding power cable immediately, if safe to do so.
DANGER
Do not remove the covers or otherwise open the PS-17 hardware. Cables and parts inside the chassis are
intended to be serviced by technical support only.
DANGER
Ensure that the power cabling remains as configured by the service technician. The designated power
cable and a grounded, correctly rated outlet must be used. If required, the cable should be protected by
a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
DANGER
The power cable included is for this product only. Do not use the power cable for any other electronic
device.
DANGER
Do not allow the power cords or cables to be compressed or bent at a sharp angle. Arrange them so that
no one might accidentally step on or trip over them.
WARNING
Do not block the vents on the PS-17 or otherwise restrict airflow. Leave clearance around all vents and
ensure that nothing falls into the vents.
Configuration and Setup
Introduction
8