Access Configure from Command WorkStation
1
Log into Command WorkStation as Administrator.
2
Access Configure through either of the following methods:
•
Select
Server
>
Configure
.
•
In
Device Center
, select
General Info
, click
Configure
in the lower right corner.
3
If the
Fiery Setup
dialog box displays, click
Configure
.
4
Log on with Administrator privileges.
Access Configure from WebTools
1
Open an Internet browser and type the IP address of the PS-17.
2
In WebTools, click the
Configure
tab.
Note:
As a security measure, WebTools is designed to work only over Hyper Text Transfer Protocol Secure
(HTTPS). By default, WebTools uses a self-signed certificate created by the PS-17. This causes the web browser
to display a certificate error while you access WebTools. It is safe to ignore this message and proceed to access
WebTools.
3
Log on with Administrator privileges.
Saving the configuration settings as a file
We recommend periodically saving the configuration settings as a file for reference, in case you decide to revert
changes.
1
Open Command WorkStation.
2
Log on with Administrator privileges.
3
Select
Device Center
>
Server Configuration
>
Save As
.
4
Specify the file type.
5
Browse to the location.
6
Click
Save
.
Configuration and Setup
Accessing the configuration settings
24
