Efcon omy, Installation & User Manual, Page: 4 / 48

Installation & User Manual - Sampling Systems
Version 140618 UK
Page 4
1.1 General
Efcon

is developed by A.V.M. (Netherlands) as a complete package for
Effluent Control Systems. Efcon

products are designed for measuring and
controlling wastewater flows.
Efcon

products meet the tough Dutch regulations (NEN 6600-1) and the
international standards according ISO 5667-2/3&10.
Products from the Efcon

 

program
Samplers (several types), level controllers, pump controllers, registration
equipment, sample distributor systems, flowmeters (industrial and
sewers), measurement pits, cool units, mobile systems, etc.
BEFORE YOU START
Read the manual before you connect the unit to a power supply or
install.
In case of illegal use or use in non-defined areas, any form of warranty will
be denied. The user needs to be informed about the user manual and
application dangers.
Installing and adjusting parameters of the sampling system should be
done by qualified personnel.
Check transported equipment for any transport damage. In case of
damage, directly contact your supplier and do not install the equipment.
The equipment is tested (different quality tests) in the AVM factory (Hei-
en Boeicop, Netherlands) before it is transported. Required maintenance
or repair, which will not influence the warranty period, will have to be
carried out by trained Efcon

specialists. All equipment returned to AVM
needs to be cleaned, sterilised and transported in a safe enclosure to avoid
health-threatening situations. In case of service or repair, the equipment
will not be accepted by AVM if there is no declaration of origin and safety
added to the equipment. Extra cleaning can be refused or will be charged!
Warranty will be denied if there are mechanical, electronic or software
changes in the unit which are not performed by AVM.
BASIC WARRANTY PERIODS
When used and installed according specifications, not used for more than
150 samples and 24 distributor turns a day in a non-aggressive well
ventilated environment.
•
••
• 48 months for thermoplastic enclosures for stationary use
•
••
• 24 months for electronic components
•
••
• 12 months for moving parts, such as pumps, pinchers & actuators.
•
••
• 3 months under courtesy for wearing Parts such as Seals, Rotor & discs of
the vacuum pump.