Efcon omy, Installation & User Manual, Page: 29 / 48

Installation & User Manual - Sampling Systems
Version 140618 UK
Page 29
Sampler turns but doesn’t
discharge medium Sample bullet clogged
with dirt Clean bullet / end cap
(
§6.5)
Sampler leaks medium Leaking seal / bullet /
O-rings Replace seals, bullet /
O-rings (
§6.5)
Sampler discharges
sample after 1 180° turn Sample bullet misplaced Open sampler, turn
sample bullet 180°
(
§6.5)
No response contact Connector wrongly
connected Rewire
connector(
§6.4)
7 ILS 3-Way Pneumatic SS
7.1 Technical specifications
ILS3WP 222& 3WP 422 according NEN 6600-1&ISO5667-2&10
Sample characteristics
• Sampler cycle time
• Material enclosure
• Material sample bullet
• Material piping
•
Medium temperature.
•
Maximum pressure
• Connection sample inlet
• Diameter sample pipe
• Minimum outlet diameter
• Sample volume
Principle 3 way flush system
• Dependable
• SS 316
• SS 316 V4A
• SS 316
•
max 60
°
C (higher on request).
•
2 Bar (higher optional)
• G¾“ / G1½
• 20 / 40 mm, other diameters on request
• 14 mm
• fixed volume, manually controlled
Actuator
• Air supply
• Protection class
• Enclosure
•
Max. torque
•
Position-indicator
•
Activation time
• Response contact
• Power supply valve
• Current
• Connection air supply
• Exhaust
• Connector
Type ILS 3WP222 Pneumatic
• 6-8 bar conditioned
• IP 65
• Hard Anodized Aluminium
•
50 Nm
•
Visual (optional)
•
3 sec
• •• • Optional
• 24 VDC ±5% / 0.13A
• 0.13A
• ILS coupling 8 mm tube fitting
• With silencer and exhaust regulator
• DIN43650-A
Surrounding conditions
•
Ambient temperature
•
Zone
•
0,1
°
C tot +40
°
C (lower optional)
•
Not in explosive hazardous environment