PD00D01KNX
– Product Handbook
Eelectron Spa
Via Claudio Monteverdi 6, I-20025 Legnano (MI), Italia
Tel +39 0331.500802 - Fax +39 0331.564826
[email protected] www.eelectron.com
C.F. e P.IVA 11666760159 - Capitale sociale: 800.000,00 interamente versato
Tribunale di Milano 359157-8760-07 - CCIAA Milano 1486549
PD00D01KNXFI00030103.DOCX
25/42
This determines the time interval between sending the first telegram (A) and the second telegram (B).
Second telegram (B)
On
Off
8-bit value
scene recall
16-bit value (decimal)
16-bit value (temperature)
16-bit value (brightness)
This parameter is visible only if the preceding parameter
“Send second telegram (B)” is set to “Yes”.
This determines the format of the second telegram (B).
Value
[0 … 255]
0 - 255,
0
This parameter is visible only if the preceding parameter “Second telegram (B)” is set to “8-bit value”.
This sets the 8-bit value to be sent in the range 0
– 255.
Scene number
scene 1
, scene 2, … scene 64
This parameter is visible only if the preceding parameter “Second telegram (B)” is set to “scene recall”.
This parameter determines the number of the 8-bit scene to be called up.
Value
[0 … 65535]
0 - 65535,
0
This parameter is visible only if the precedi
ng parameter “Second telegram (D)” is set to “16-bit value (decimal).”
This sets the 16-bit value to be sent in the range 0
– 65535.
Value
0.0°C / 32F; 0.5°C / 32F; 1.0°C / 34F; 1.5°C /35F; … 16.5°C /
62F; … 39.5°C/103F; 40.0°C / 104F
This parameter is visible only if the preceding parameter “Second telegram (B)” is set to “16-bit value (temperature)”.
This sets the 16-bit value to be sent in the range 0.0°C / 32F - 40.0°C / 104F.
Value
0LUX; 1LUX; 2LUX; 3LUX; 4LUX; 5LUX; 7LUX; 10LUX; 20LUX;
50LUX; 100LUX; 150LUX; 200LUX; 250LUX; 300LUX; 350LUX;
400LUX; 450LUX;
500LUX
; 550LUX; 600LUX; 650LUX; 700LUX;
750LUX; 800LUX; 850LUX; 900LUX; 950LUX; 1000LUX;
2000LUX
This parameter is visible only if the preceding parameter “Second telegram (B)” is set to “16-bit value (brightness)”.
This sets the 16-bit value to be sent in the range 0 LUX - 2000 LUX .
Send second telegram (D) cyclically
no
1 second
5 seconds
10 seconds
30 seconds
1 minute
If you want cyclical sending after a motion is detected, then this parameter must be set to the corresponding value.
The following parameter is visible only if the device is working as a slave (parameter “Device works as” is set to “Slave”).
Parameter
Setting
Send trigger telegrams cyclically
no
1 second
5 seconds
10 seconds
30 seconds
1 minute
A device in slave mode can only send an “On telegram” to the master if motion has been detected to trigger this via the secondary
input.
The internal overshoot time of 10 seconds is fixed, i.e. a telegram can be sent every 10 seconds to the master at most.
If the slave detector is triggered permanently, then a telegram is sent to the master only on the first triggering. However, if the user in
this case wants to send further telegrams, then this can be achieved, but the above parameters must be set accordingly.
