Eelectron KNX PD00E00KNX, Product Handbook

Page: 7 / 46

PD00E0XKNXFI00020100_HANDBOOK_EN.DOCX
PD00E0xKNX KNX PRESENCE DETECTORS RANGE Handbook
Eelectron SpA, Via Monteverdi 6,
I-20025 Legnano (MI), Italia
Tel: +39 0331.500802 Fax:+39 0331.564826
E-mail: info@eelectron.com Web:
www.eelectron.com
C.F. e P.IVA 11666760159
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
7/46
resumes the light behaviour in any terrestrial
position and includes the management of warm
and cold light.
VIRTUAL HOLDER MODULE
Parameters relating to the logic of automatic
recognition of the presence of people in the room
typically for hotel application
CONFIGURABLE SMART LOGICS
It includes 12 configurable logics that include
algebraic and conditional expressions, the number
of logics is reduced if the "virtual holder" or
"circadian rhythm" or "smart sensor (CO
2
)" modules
are used.
Main functions digital inputs 1,2,3
Inputs can be connected to pushbuttons, switches,
and can be used for:
 1-bit commands: loads activation / deactivation
commands (ON / OFF / TOGGLE) with short
pressure or with long and short pressure
differentiation

1 byte commands (0-255 or HVAC commands
or % value commands).
 Sending long action telegrams to the same
short action address or to a different group
address
 Commands for cyclic sending

Sequences (3 commands that mix 1 bit / 1 byte
objects) with different group addresses - in
short and long press mode or in switching
mode
 Dimmer management (with single button or
with double button)
 Roller shutters and blinds management (with
single button or with double button)

Control sequences with 1 bit to manage
switching on / off lights or rows of lights

RGB color setting with fixed value (short
pressure) or color change (long pressure); 1
byte datapoint or 3 byte selectable
 MUR / DND (Make Up Room - / Do Not Disturb),
function with built-in logics

Loop function between values to send step by
step a sequence of values of 1 byte
Main functions analog input 3
Input 3 can be configured as analog for the
connection of NTC temperature probes (STANDARD,
MULTI, SPACE and HIGH BAY) and also as a "smart
sensor" input for reading temperature and CO2
(MULTI and SPACE versions)
NTC probes :
For NTC temperature probe the following eelectron
code accessories must be used:
TS01A01ACC (from -20°C to +100°C)
TS01B01ACC (from -50°C to +60°C)
Smart sensor:
Use the external accessory SM03E01ACC, this
accessory includes a temperature sensor (range
from -5 ° C to + 50 ° C) and a CO
2
sensor (range from
0 ppm to 1000 ppm).
Thermostat main functions

Different Control Algorithms: 2-point on / off;
PWM; continuous control / Fan Coil control
 Different modes of operation mode setting:
Automatic HVAC / HVAC Manual / Setpoint
 Additional command for 2nd stage
management

Window contact management

Additional external probe (optional)
Logics and Virtual Holder function
The device includes some logic functions and a
logic for the automatic recognition of the presence
called "Virtual Holder"
Logics main functions
 Each logic has 2 input objects and 1 output
object available

Smart logics with complex expressions may use
4 input and 1 output objects

Parameters: delay and number of
retransmissions
 NOT / AND / OR / NAND / NOR / XOR / XNOR