PD00E0XKNXFI00020100_HANDBOOK_EN.DOCX
PD00E0xKNX KNX PRESENCE DETECTORS RANGE Handbook
Eelectron SpA, Via Monteverdi 6,
I-20025 Legnano (MI), Italia
Tel: +39 0331.500802 Fax:+39 0331.564826
E-mail: [email protected] Web:
C.F. e P.IVA 11666760159
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
41/46
Sunset
event
time
adjustment [min]
-
These parameters define the actions related to the
sunrise and sunset events and the relative deviation
(typical application: garden lights on / off)
The
forced circadian rhythm
requires to enter in
ETS data relating to the duration and composition
of an ideal day: a forced day. The forced rhythm
repeats the same day / night cycle in the same way,
this cycle can also have a duration different from 24
hours and the duration of the day and night are
freely configurable.
KNX PARAMETER
SETTINGS
Restart day telegram
The forced day restart can be triggered with a 1 bit
telegram, with the value "0" or "1"
Restart automatically
no / yes
Choosing "yes" at the end of the forced day a new forced
day is restarted
Day duration: hours
0 .. 31
Day duration: minutes
0 .. 59
Sunrise : hours
0 .. 31
Sunrise. minutes
0 .. 59
Sunset : hours
0 .. 31
Sunset: minutes
0 .. 59
Current
time
after
download hour
0 .. 31
Current
time
after
download minutes
0 .. 59
With the parameters listed above you set the duration of
the forced day and the time of sunrise and sunset
Set color temperature
The color temperature control must be done taking
into account the type of lighting fixtures that are
going to be controlled and the characteristics of
warm white and cold white which can be different
from lamp to lamp.
KNX PARAMETER
SETTINGS
Warm (minimum) color
500 .. 3500
temperature
Cool (maximum) color
temperature
3500 .. 6500
Forced color temperature
after download
500 .. 6500
These parameters set the characteristics of the lamp
(check the lamp datasheet) and the color temperature
value at download.
Maximum negative color
adjustment [*10K]
0 .. 255
Massima
variazione
positiva di colore [*10K]
0..255
Color adjustment after
download
-127 .. + 128
These parameters set the limits of manual adjustment
that can be made on the color temperature with a 4-bit
dimming object.
Telegram for automatic
color temperature
telegram
Defines the value of the 1-bit telegram which changes
the color temperature control from manual to
automatic (the opposite value set the manual control)
Reset color temperature
adjustment
on
enable/disable change
no / yes
Reset color temperature
adjustment
on
auto/manual change
no / yes
Color
temperature
adjustment
reset
telegram
These parameters define whether the manual variation
imposed on the color temperature should be
maintained or not.
Set brightness
As for the color temperature, parameters are
available for setting the brightness, intended as a
percentage control value of the lighting fixtures.
Similarly to what was previously seen, for the color
temperature it is possible to set minimum (sunrise)
and maximum (noon) brightness values; apply
manual changes to the set value, switch from
automatic to manual control.
