EDYO LIVING ZHX-23-040, Use And Care Manual

Page: 5 / 11

— 3 —
2.2 Installing the fireplace insert

Carefully set the fireplace insert (W into the back of the mantel and center it in the opening. Use care not
to scratch the wood.Check the alignment, and then attach the fireplace insert (W) to the mantel by
inserting the screws (19) through the drilled holes on the trims ( Y) and securely screw into place using a
Phillips screwdriver.
ELECTRICAL SPECIFICATIONS

voltage: 120 VAC, 60 Hz

Watts: 1500 Watts
Read all instructions and warning prior to operating the appliance.
Ensure that all controls are in the “ OFF ” status
before plugging the appliance into a properly
grounded electrical outlet.
This appliance is for use on 120 Volts.The
appliance has a 3-prong grounded plug (Figure
1). If your electrical outlet has only 2 slots
(Figure 1), you will have to use an adapter
(Figure 1) to convert from the 3-prong power
cord to a 2-slot receptacle.The green grounding
plug extending from the adapter must be
securely connected to a permanent ground
such as a properly grounded outlet box.The
adapter should only be used if a proper 3-slot
receptacle is not available.
NOTE: Adapters are not allowed for use in Canada.
Figure 1
3. OPERATING INSTRUCTIONS
NOTE:DO NOT attempt to install the insert from the front of the mantel - it will not fit.
Screws (19)