background image

— 8 —

ALWAYS

turn the appliance

OFF

and

unplug the power cord from the outlet

before

cleaning, performing maintenance, or moving this fireplace. Failure to do so could
result in

electric shock, fire, or personal injury.

NEVER immerse in water or spray with water. Doing so could result in electric shock,
fire, or personal injury.

Risk of electric shock! DO NOT OPEN! Replace parts contact our customer
service team for help first !

The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication
or maintenance.To remove any accumulation of dust or debris, the soft brush attachment of a vacuum
cleaner should occasionally be used to clean the outlet grille of the fan heater.

Use a soft, clean cloth that will not scratch the surface when dusting.

Use a clean soft cloth dampened with warm water to clean the fireplace surface.DO NOT use household
or abrasive cleaners, as these products may damage the surface.

When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap
if necessary; DO NOT use cleaning powders or any other substance with abrasives since these
substances will scratch glass.

Under no circumstances should this product be operated with a broken or chipped glass panel.

Do not strike or slam the glass.

In the event that your appliance is stained or otherwise damaged during use, we recommend that you
call a professional to it.

When not in use please unplug the cord from the outlet to prevent any damage or accidents.

This warrants to the original purchaser that this product is free from defects in material and workmanship as
of the date of purchase and that it will, under normal use and proper care, remain so for one year from the
date of purchase. Missing or initially defective parts will be replaced free of charge during the period of this
limited warranty. If parts are unavailable, comparable replacement of refund will be given.

The original

dated sales receipt is required for all warranty claims.

This warranty does not cover damage which has

occurred during transport from the point of purchase to the consumer's home. This warranty does not cover
glass, light bulbs, batteries, transportation, labor, or other issues not associated with the manufacture of the
product.

This product is for residential use only. Any and all commercial use of this product voids all
warranties, and frees the manufacturer from all liability.

Read and understand all assembly and operating instructions, and all safety information and warnings,
before use. The following will void this warranty: Damage caused from tampering with,modifying, or altering
the fireplace insert in any manner; Damage due to incorrect assembly, improper care, misuse, or abuse;
Damage from being used with the wrong power source; Water damage; Damage caused from this insert
being used outdoors;Damage caused from this insert being used for excessive periods
of time; Damage caused by the insert being used in a commercial application; Damage from use as a
primary heat source; Other misuse or abuse not specifically listed herein.

This product is not intended to be used as a primary heat source.It is for supplemental heating
purposes only.

4. CARE AND MAINTENANCE

5. LIMITED WARRANTY

Summary of Contents for ZHX-23-040












Reviews: