— 6 —
1.
lnstalling the battery
The battery is supplied with the remote control. The first thing to do with the remote control is to remove the
plastic sheet insulated the battery.For replacement battery, use lithium-based CR2025 battery. Please follow
the sequence below to replace the battery.
Take out the battery bracket.
lnsert the battery with the button side into the battery
bracket, making sure the battery is firmly seated.
Press the battery bracket into the remote control,
making sure it snaps into position.
Turn the remote over and aim it towards the fireplace / heater unit.
Press the power button on the top and see if the flames on the fireplace/heater turn on or off.
lf nothing appears to happen, check to make sure the battery is installed correctly, and try again.
WARNING:
Do not ingest batteries.
1. Non-rechargeable batteries are not to be recharged.
2. Batteries are to be inserted with the correct polarity.
3. Exhausted batteries are to be removed from the product.
4. Always purchase the correct size and grade of battery most suitable
5. for the intended use.
6. Replace all batteries of a set at the same time.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. Remove batteries from equipment when not used for an extended period of time.
2.
Using the Remote Control
Buttons on the Remote Control (Figure 4) have the
same functions as those on the Control Panel
except Heater, Child Lock and the transformation
between the °F and °C.
CHILD LOCK button (Figure 4.E)
For Child Lock, it will quickly activate and
deactivate immediately after clicking.
3b. Remote Control
Figure 4
Summary of Contents for ZHX-23-040
Page 2: ......